Product Details:
Payment & Shipping Terms:
|
Overfeeding Ratio: | -10% To 30% | Entry Rail Length: | 3m/6m |
---|---|---|---|
Max. Chamber Working Temperature: | 230 Degree | Chain Type: | Horizontal |
Edge Controller: | Three-finger/Two-finger Uncurler Device | Packing: | Export Standard |
Fabric Hold By: | Pin/clip/combined | Exit Type: | Plaiting/Batching |
Highlight: | stenter textile machine,stenter finishing machine |
Advanced woven Fabric stenter Machine , Humanized design , Inverter controlled
1. The folloing activities are carried out in stenter machines:
1) Application of finishing chemicals,
2) Drying and stretching fabrics,
3) Textile curing,
4) Fabric heat setting,
5) Pigment dyeing
2. Technical data:
Roller width: | 1400-3600mm | Working width: |
1200-3400mm
|
Heating source: |
nature gas/ oil/ electricity/steam
|
Width adjustment range: |
700-3400mm
|
Chambers No.
|
2-15 pcs | Temperature of chamber: |
100-230℃
|
Fabric held by: |
clip/pin/combined
|
Air pressure: | above 0.5mpa |
Padder type | Finishing/Dyeing | Installed power: |
Approx 140Kw
|
3. Machine features:
1) Drying chambers: To dry the fabric or to fix the finishing chemicals by hot air from the blowers. The blower sucks hot air from radiator and blow it into the nozzles through which drying occurs. Inside the drying chamber also contains width adjustment spindle which can adjust the each chamber's working width, and pin/clip chain track.
2) Thermal oil circulation heating system:
Thermal oil circulation heating system+ by means of digital temperature controller with PT100 temperature sensor+control 3-way motorized valves.
The heat exchanger is Fin type, it's big and efficient, heat storage is low. Heating and heat dissemination also spread fast to keep steady temperature. Assure the fabric is under good thermo-fixing, to upgrade the quality.
Contact Person: Ms. SHIRLEY WU
Tel: 008613974856209
Fax: 86-731-88051858